Very first pi project! PC temp monitor using 7in pi screen, Raspberry Pi 4, and MoBro hardware monitoring program! : raspberry_pi

Very first pi project! PC temp monitor using 7in pi screen, Raspberry Pi 4, and MoBro hardware monitoring program! from raspberry_pi

Raspberry Pi Projects

This is a links post for Raspberry Pi information.

GENERAL:

https://www.raspberrypi.org/forums/viewtopic.php?t=46771 https://www.youtube.com/watch?v=ddlDgUymbxc&feature=youtu.be https://flatlogic.com/blog/how-to-build-an-iot-dashboard/ https://www.waveshare.com/w/upload/4/46/1.3inch_OLED_HAT_User_Manual_EN.pdf https://www.youtube.com/watch?v=afBSpobG6Zo https://raspberrytips.com/remote-desktop-raspberry-pi/ https://www.raspberrypi.org/forums/viewtopic.php?t=201516 https://www.quartoknows.com/page/raspberry-pi-shutdown-button#:~:text=Press%20the%20shutdown%20button.,stopped%2C%20aborting%20the%20shutdown%20procedure. https://tronixstuff.com/2013/08/05/part-review-74hc4067-16-channel-analog-multiplexerdemultiplexer/

 

WS2812 / LEDs:

https://pinout.xyz/pinout/1_wire https://github.com/jgarff/rpi_ws281x https://github.com/tom-2015/rpi-ws2812-server

Controlling WS2812b LEDs with a Raspberry Pi

https://raspberrypi.stackexchange.com/questions/3980/is-it-possible-to-connect-an-led-directly-to-the-gpio-of-the-pi

Connect and Control WS2812 RGB LED Strips via Raspberry Pi

https://www.raspberrypi.org/forums/viewtopic.php?p=609380#p609380 https://www.tweaking4all.com/hardware/arduino/adruino-led-strip-effects/ https://github.com/topics/ws2812b?l=python https://jackw01.github.io/led-control/ https://core-electronics.com.au/tutorials/ws2812-addressable-leds-raspberry-pi-quickstart-guide.html https://learn.adafruit.com/neopixels-on-raspberry-pi/python-usage https://magpi.raspberrypi.org/articles/neopixels-python https://www.raspberrypi.org/forums/viewtopic.php?t=215428 https://howchoo.com/g/ytzjyzy4m2e/build-a-simple-raspberry-pi-led-power-status-indicator

[…]

How to build an IoT dashboard – Flatlogic Blog

Now that initialstate no longer offers a free tier, although kudos for grandfathering established accounts, I’m looking for someplace to feed my datas to and have it make pretty charts for me.

 

Source: How to build an IoT dashboard – Flatlogic Blog

matchettandtheotherguy.com

Ohhhhh!

 

Source: matchettandtheotherguy.com

I Dig George

Source: I Dig George

Remote Desktop on Raspberry Pi

Remote desktop with xrdp

Xrdp is an opensource remote desktop protocol server, which allows you to connect to the Linux desktop from any operating system.

If you need to open or redirect access on your router or firewall, xrdp uses the standard port 3389.

The installation of xrdp is straightforward since it is available in […]

Connect and Control WS2812 RGB LED Strips via Raspberry Pi

Preparation & Installation

Before we install the Raspberry Pi library for the WS2812 LEDs, some preparations have to be made:

Update package sources: sudo apt-get update

We install the required packages (confirm with Y): sudo apt-get install gcc make build-essential python-dev git scons swig

The audio output must be deactivated. For this we edit […]

How to Add a Power Button to Your Raspberry Pi

So the pi monitors GPIO 3 when in standby mode for signal high to boot, we can add a software routine to monitor for that signal once booted to shutdown. Then it is just a matter of a switch across pins 5&6.

Basically, make two files, one to call the other. add the one that […]